技术标签: 史上最全最强SpringMVC详细教程 Springmvc
1、前端控制器DispatcherServlet(不需要程序员开发)
作用接收请求,响应结果,相当于转发器,中央处理器。
有了DispatcherServlet减少了其它组件之间的耦合度。
2、处理器映射器HandlerMapping(不需要程序员开发)
作用:根据请求的url查找Handler
3、处理器适配器HandlerAdapter
作用:按照特定规则(HandlerAdapter要求的规则)去执行Handler
4、处理器Handler(需要程序员开发)
注意:编写Handler时按照HandlerAdapter的要求去做,这样适配器才可以去正确执行Handler
5、视图解析器View resolver(不需要程序员开发)
作用:进行视图解析,根据逻辑视图名解析成真正的视图(view)
6、视图View(需要程序员开发jsp)
View是一个接口,实现类支持不同的View类型(jsp、freemarker、pdf…)
首先,导入SpringMVC需要的jar包。
添加Web.xml配置文件中关于SpringMVC的配置
<!--configure the setting of springmvcDispatcherServlet and configure the mapping-->
<servlet>
<servlet-name>springmvc</servlet-name>
<servlet-class>org.springframework.web.servlet.DispatcherServlet</servlet-class>
<init-param>
<param-name>contextConfigLocation</param-name>
<param-value>classpath:springmvc-servlet.xml</param-value>
</init-param>
<!-- <load-on-startup>1</load-on-startup> -->
</servlet>
<servlet-mapping>
<servlet-name>springmvc</servlet-name>
<url-pattern>/</url-pattern>
</servlet-mapping>
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:context="http://www.springframework.org/schema/context"
xmlns:mvc="http://www.springframework.org/schema/mvc"
xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd
http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context-4.1.xsd
http://www.springframework.org/schema/mvc http://www.springframework.org/schema/mvc/spring-mvc-4.1.xsd">
<!-- scan the package and the sub package -->
<context:component-scan base-package="test.SpringMVC"/>
<!-- don't handle the static resource -->
<mvc:default-servlet-handler />
<!-- if you use annotation you must configure following setting -->
<mvc:annotation-driven />
<!-- configure the InternalResourceViewResolver -->
<bean class="org.springframework.web.servlet.view.InternalResourceViewResolver"
id="internalResourceViewResolver">
<!-- 前缀 -->
<property name="prefix" value="/WEB-INF/jsp/" />
<!-- 后缀 -->
<property name="suffix" value=".jsp" />
</bean>
</beans>
在WEB-INF文件夹下创建名为jsp的文件夹,用来存放jsp视图。创建一个hello.jsp,在body中添加“Hello World”。
建立包及Controller,如下所示
编写Controller代码
@Controller
@RequestMapping("/mvc")
public class mvcController {
@RequestMapping("/hello")
public String hello(){
return "hello";
}
}
Dispatcherservlet
DispatcherServlet是前置控制器,配置在web.xml文件中的。拦截匹配的请求,Servlet拦截匹配规则要自已定义,把拦截下来的请求,依据相应的规则分发到目标Controller来处理,是配置spring MVC的第一步。
InternalResourceViewResolver
视图名称解析器
以上出现的注解
@Controller 负责注册一个bean 到spring 上下文中
@RequestMapping 注解为控制器指定可以处理哪些 URL 请求
@Controller
负责注册一个bean 到spring 上下文中
@RequestMapping
注解为控制器指定可以处理哪些 URL 请求
@RequestBody
该注解用于读取Request请求的body部分数据,使用系统默认配置的HttpMessageConverter进行解析,然后把相应的数据绑定到要返回的对象上 ,再把HttpMessageConverter返回的对象数据绑定到 controller中方法的参数上
@ResponseBody
该注解用于将Controller的方法返回的对象,通过适当的HttpMessageConverter转换为指定格式后,写入到Response对象的body数据区
@ModelAttribute
在方法定义上使用 @ModelAttribute 注解:Spring MVC 在调用目标处理方法前,会先逐个调用在方法级上标注了@ModelAttribute 的方法
在方法的入参前使用 @ModelAttribute 注解:可以从隐含对象中获取隐含的模型数据中获取对象,再将请求参数 –绑定到对象中,再传入入参将方法入参对象添加到模型中
@RequestParam
在处理方法入参处使用 @RequestParam 可以把请求参 数传递给请求方法
@PathVariable
绑定 URL 占位符到入参
@ExceptionHandler
注解到方法上,出现异常时会执行该方法
@ControllerAdvice
使一个Contoller成为全局的异常处理类,类中用@ExceptionHandler方法注解的方法可以处理所有Controller发生的异常
//match automatically
@RequestMapping("/person")
public String toPerson(String name,double age){
System.out.println(name+" "+age);
return "hello";
}
package test.SpringMVC.model;
public class Person {
public String getName() {
return name;
}
public void setName(String name) {
this.name = name;
}
public int getAge() {
return age;
}
public void setAge(int age) {
this.age = age;
}
private String name;
private int age;
}
//boxing automatically
@RequestMapping("/person1")
public String toPerson(Person p){
System.out.println(p.getName()+" "+p.getAge());
return "hello";
}
//the parameter was converted in initBinder
@RequestMapping("/date")
public String date(Date date){
System.out.println(date);
return "hello";
}
//At the time of initialization,convert the type "String" to type "date"
@InitBinder
public void initBinder(ServletRequestDataBinder binder){
binder.registerCustomEditor(Date.class, new CustomDateEditor(new SimpleDateFormat("yyyy-MM-dd"),
true));
}
//pass the parameters to front-end
@RequestMapping("/show")
public String showPerson(Map<String,Object> map){
Person p =new Person();
map.put("p", p);
p.setAge(20);
p.setName("jayjay");
return "show";
}
前台可在Request域中取到"p"
//pass the parameters to front-end using ajax
@RequestMapping("/getPerson")
public void getPerson(String name,PrintWriter pw){
pw.write("hello,"+name);
}
@RequestMapping("/name")
public String sayHello(){
return "name";
}
前台用下面的Jquery代码调用
$(function(){
$("#btn").click(function(){
$.post("mvc/getPerson",{
name:$("#name").val()},function(data){
alert(data);
});
});
});
//redirect
@RequestMapping("/redirect")
public String redirect(){
return "redirect:hello";
}
需要导入两个jar包
在SpringMVC配置文件中加入
<!-- upload settings -->
<bean id="multipartResolver" class="org.springframework.web.multipart.commons.CommonsMultipartResolver">
<property name="maxUploadSize" value="102400000"></property>
</bean>
@RequestMapping(value="/upload",method=RequestMethod.POST)
public String upload(HttpServletRequest req) throws Exception{
MultipartHttpServletRequest mreq = (MultipartHttpServletRequest)req;
MultipartFile file = mreq.getFile("file");
String fileName = file.getOriginalFilename();
SimpleDateFormat sdf = new SimpleDateFormat("yyyyMMddHHmmss");
FileOutputStream fos = new FileOutputStream(req.getSession().getServletContext().getRealPath("/")+
"upload/"+sdf.format(new Date())+fileName.substring(fileName.lastIndexOf('.')));
fos.write(file.getBytes());
fos.flush();
fos.close();
return "hello";
}
<form action="mvc/upload" method="post" enctype="multipart/form-data">
<input type="file" name="file"><br>
<input type="submit" value="submit">
</form>
@Controller
@RequestMapping("/test")
public class mvcController1 {
@RequestMapping(value="/param")
public String testRequestParam(@RequestParam(value="id") Integer id,
@RequestParam(value="name")String name){
System.out.println(id+" "+name);
return "/hello";
}
}
@Controller
@RequestMapping("/rest")
public class RestController {
@RequestMapping(value="/user/{id}",method=RequestMethod.GET)
public String get(@PathVariable("id") Integer id){
System.out.println("get"+id);
return "/hello";
}
@RequestMapping(value="/user/{id}",method=RequestMethod.POST)
public String post(@PathVariable("id") Integer id){
System.out.println("post"+id);
return "/hello";
}
@RequestMapping(value="/user/{id}",method=RequestMethod.PUT)
public String put(@PathVariable("id") Integer id){
System.out.println("put"+id);
return "/hello";
}
@RequestMapping(value="/user/{id}",method=RequestMethod.DELETE)
public String delete(@PathVariable("id") Integer id){
System.out.println("delete"+id);
return "/hello";
}
}
form表单发送put和delete请求
在web.xml中配置
<!-- configure the HiddenHttpMethodFilter,convert the post method to put or delete -->
<filter>
<filter-name>HiddenHttpMethodFilter</filter-name>
<filter-class>org.springframework.web.filter.HiddenHttpMethodFilter</filter-class>
</filter>
<filter-mapping>
<filter-name>HiddenHttpMethodFilter</filter-name>
<url-pattern>/*</url-pattern>
</filter-mapping>
在前台可以用以下代码产生请求
<form action="rest/user/1" method="post">
<input type="hidden" name="_method" value="PUT">
<input type="submit" value="put">
</form>
<form action="rest/user/1" method="post">
<input type="submit" value="post">
</form>
<form action="rest/user/1" method="get">
<input type="submit" value="get">
</form>
<form action="rest/user/1" method="post">
<input type="hidden" name="_method" value="DELETE">
<input type="submit" value="delete">
</form>
导入以下jar包
方法代码
@Controller
@RequestMapping("/json")
public class jsonController {
@ResponseBody
@RequestMapping("/user")
public User get(){
User u = new User();
u.setId(1);
u.setName("jayjay");
u.setBirth(new Date());
return u;
}
}
@ExceptionHandler
public ModelAndView exceptionHandler(Exception ex){
ModelAndView mv = new ModelAndView("error");
mv.addObject("exception", ex);
System.out.println("in testExceptionHandler");
return mv;
}
@RequestMapping("/error")
public String error(){
int i = 5/0;
return "hello";
}
@ControllerAdvice
public class testControllerAdvice {
@ExceptionHandler
public ModelAndView exceptionHandler(Exception ex){
ModelAndView mv = new ModelAndView("error");
mv.addObject("exception", ex);
System.out.println("in testControllerAdvice");
return mv;
}
}
另一种处理全局异常的方法
在SpringMVC配置文件中配置
<!-- configure SimpleMappingExceptionResolver -->
<bean class="org.springframework.web.servlet.handler.SimpleMappingExceptionResolver">
<property name="exceptionMappings">
<props>
<prop key="java.lang.ArithmeticException">error</prop>
</props>
</property>
</bean>
error是出错页面
public class MyInterceptor implements HandlerInterceptor {
@Override
public void afterCompletion(HttpServletRequest arg0,
HttpServletResponse arg1, Object arg2, Exception arg3)
throws Exception {
System.out.println("afterCompletion");
}
@Override
public void postHandle(HttpServletRequest arg0, HttpServletResponse arg1,
Object arg2, ModelAndView arg3) throws Exception {
System.out.println("postHandle");
}
@Override
public boolean preHandle(HttpServletRequest arg0, HttpServletResponse arg1,
Object arg2) throws Exception {
System.out.println("preHandle");
return true;
}
}
<!-- interceptor setting -->
<mvc:interceptors>
<mvc:interceptor>
<mvc:mapping path="/mvc/**"/>
<bean class="test.SpringMVC.Interceptor.MyInterceptor"></bean>
</mvc:interceptor>
</mvc:interceptors>
导入Hibernate-validate需要的jar包
(未选中不用导入)
编写实体类User并加上验证注解
public class User {
public int getId() {
return id;
}
public void setId(int id) {
this.id = id;
}
public String getName() {
return name;
}
public void setName(String name) {
this.name = name;
}
public Date getBirth() {
return birth;
}
public void setBirth(Date birth) {
this.birth = birth;
}
@Override
public String toString() {
return "User [id=" + id + ", name=" + name + ", birth=" + birth + "]";
}
private int id;
@NotEmpty
private String name;
@Past
@DateTimeFormat(pattern="yyyy-MM-dd")
private Date birth;
}
ps:@Past表示时间必须是一个过去值
<form:form action="form/add" method="post" modelAttribute="user">
id:<form:input path="id"/><form:errors path="id"/><br>
name:<form:input path="name"/><form:errors path="name"/><br>
birth:<form:input path="birth"/><form:errors path="birth"/>
<input type="submit" value="submit">
</form:form>
ps:path对应name
@Controller
@RequestMapping("/form")
public class formController {
@RequestMapping(value="/add",method=RequestMethod.POST)
public String add(@Valid User u,BindingResult br){
if(br.getErrorCount()>0){
return "addUser";
}
return "showUser";
}
@RequestMapping(value="/add",method=RequestMethod.GET)
public String add(Map<String,Object> map){
map.put("user",new User());
return "addUser";
}
}
ps:
1.因为jsp中使用了modelAttribute属性,所以必须在request域中有一个"user".
2.@Valid 表示按照在实体上标记的注解验证参数
3.返回到原页面错误信息回回显,表单也会回显
错误信息自定义
在src目录下添加locale.properties
NotEmpty.user.name=name can't not be empty
Past.user.birth=birth should be a past value
DateTimeFormat.user.birth=the format of input is wrong
typeMismatch.user.birth=the format of input is wrong
typeMismatch.user.id=the format of input is wrong
在SpringMVC配置文件中配置
<!-- configure the locale resource -->
<bean id="messageSource" class="org.springframework.context.support.ResourceBundleMessageSource">
<property name="basename" value="locale"></property>
</bean>
国际化显示
在src下添加locale_zh_CN.properties
username=账号
password=密码
locale.properties中添加
username=user name
password=password
创建一个locale.jsp
在SpringMVC中配置<!-- make the jsp page can be visited -->
<mvc:view-controller path="/locale" view-name="locale"/>
让locale.jsp在WEB-INF下也能直接访问
最后,访问locale.jsp,切换浏览器语言,能看到账号和密码的语言也切换了
创建一个test.SpringMVC.integrate的包用来演示整合,并创建各类
User实体类
public class User {
public int getId() {
return id;
}
public void setId(int id) {
this.id = id;
}
public String getName() {
return name;
}
public void setName(String name) {
this.name = name;
}
public Date getBirth() {
return birth;
}
public void setBirth(Date birth) {
this.birth = birth;
}
@Override
public String toString() {
return "User [id=" + id + ", name=" + name + ", birth=" + birth + "]";
}
private int id;
@NotEmpty
private String name;
@Past
@DateTimeFormat(pattern="yyyy-MM-dd")
private Date birth;
}
@Component
public class UserService {
public UserService(){
System.out.println("UserService Constructor...\n\n\n\n\n\n");
}
public void save(){
System.out.println("save");
}
}
@Controller
@RequestMapping("/integrate")
public class UserController {
@Autowired
private UserService userService;
@RequestMapping("/user")
public String saveUser(@RequestBody @ModelAttribute User u){
System.out.println(u);
userService.save();
return "hello";
}
}
Spring配置文件
在src目录下创建SpringIOC的配置文件applicationContext.xml
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans.xsd
http://www.springframework.org/schema/util
http://www.springframework.org/schema/util/spring-util-4.0.xsd
http://www.springframework.org/schema/context
http://www.springframework.org/schema/context/spring-context.xsd
"
xmlns:util="http://www.springframework.org/schema/util"
xmlns:p="http://www.springframework.org/schema/p"
xmlns:context="http://www.springframework.org/schema/context"
>
<context:component-scan base-package="test.SpringMVC.integrate">
<context:exclude-filter type="annotation"
expression="org.springframework.stereotype.Controller"/>
<context:exclude-filter type="annotation"
expression="org.springframework.web.bind.annotation.ControllerAdvice"/>
</context:component-scan>
</beans>
在Web.xml中添加配置
<!-- configure the springIOC -->
<listener>
<listener-class>org.springframework.web.context.ContextLoaderListener</listener-class>
</listener>
<context-param>
<param-name>contextConfigLocation</param-name>
<param-value>classpath:applicationContext.xml</param-value>
</context-param>
<!-- scan the package and the sub package -->
<context:component-scan base-package="test.SpringMVC.integrate">
<context:include-filter type="annotation"
expression="org.springframework.stereotype.Controller"/>
<context:include-filter type="annotation"
expression="org.springframework.web.bind.annotation.ControllerAdvice"/>
</context:component-scan>
文章浏览阅读2.4k次,点赞6次,收藏15次。gd32 内部flash 锁死_gd32程序写保护
文章浏览阅读1.9k次,点赞3次,收藏2次。数据库字段类型于JAVA属性类型对应表 MySQL TypeJava TypeCHARStringVARCHARStringLONGVARCHARStringNUMERICjava.math.BigDecimal_binary 对应java
文章浏览阅读8.1k次,点赞3次,收藏8次。Android自带的跑马灯效果不太好控制,还必须要满足条件才能有效果,而且速度不受控制。前面我的博客中有一篇就是用Android自带的跑马灯效果的,但是基于不同的使用效果,这里在网上找到了一个更好的方法。沿用了作者的一些方法,但是添加了更好的扩展功能,和大家一起分享。这里面有控制往左往右两个方向的实现。1、首先是简单的布局main.xml
文章浏览阅读2.2k次。转载地址:http://blog.csdn.net/AntsBin/article/details/52523985之前每个版本的ipa包打出来都才20M出头,后来不知道从哪个版本起打的包每次都将近40M,但是工程中也没有明显的增加很大第三方类或者图片、静态文件。于是就开始了各种瘦身计划:压缩图片,删除不必要静态库。做了一番改动后发现包只比原来小了1M多,收效甚微。后来听同事说了a_unityframework.framwork 压缩 ios
文章浏览阅读53次。FastReport4.6程序员手册_翻译一、使用TfrxReport 组件工作1、加载并存储报表默认情况下,报表窗体同项目窗体构存储在同一个DFM文件中。多数情况下,无须再操作,因而你就不必采用特殊方法加载报表。如果你决定在文件中存储报表窗体或者是数据库的Blob字段(他提供了非常大的弹性,你能够在非编译程序中修改),你必须使用“TfrxReport”提供的加载和存储方法。function ..._fastreport中手册(翻译整理).
文章浏览阅读1.1k次。鄙视下百度空间,他姥姥...竟然限量字符40000字节!靠....一年前初学VB时我对这个API就特感兴趣,听说这个API可以更改图标资源,就更感兴趣了,后来试了试,发现修改其它资源貌似没多大问题,唯独修改图标时无果,我发现所修改的图虽说已经写入到资源文件中了,但是就是无法显示。后来到网上查了下,发现用UpdateResource修改EXE图标的没一个成功的,大致都是发生成功写入,_delphi修改exe图标
文章浏览阅读2k次。需求分析:实现《天天酷跑》的核心逻辑,该游戏具有登录、注册、玩家操作、结束等功能。注册模块:需要玩家身份信息为:用户名 密码 昵称 邮箱登录模块:需要玩家信息为:用户名 和 密码玩家(Person)功能:跳跃up(y坐标的改变),右移功能(right),左移功能left(修 改x的坐 标),判断玩家是否越界的功能。玩家具有得分、跑酷距离、生命值属性。初始位置坐标为(x,y),补充自由下落功能(注意y坐标的临界点),login方法,注册方法,(建议可以通过在控制台内输入w a d._虚拟机中的idea中scala写一款小游戏
文章浏览阅读137次。1、什么是springboot?在Spring框架这个大家族中,产生了很多衍生框架,比如 Spring、SpringMvc框架等,Spring的核心内容在于控制反转(IOC)和依赖注入(DI),所谓控制反转并非是一种技术,而是一种思想,在操作方面是指在spring配置文件中创建,依赖注入即为由spring容器为应用程序的某个对象提供资源,比如 引用对象、常量数据等。SpringBoot是一个框..._springboot 绿色箭头执行相当于
文章浏览阅读117次。文件:内存屏障机制及内核相关源代码分析.pdf大小:70KB下载:下载本来不打算立刻写关于这次 软件开发大会 的事情。太多可以写的东西,反而不知道怎么写起。今天才有机会上网到处转转,转到 周伟民老师 的 blog 上,看到这么一篇 。里面既然提到我,就想在上面回上两句。可惜 csdn 的 blog 系统实在是太烂了(这个话题我们在周六的沙龙上集..._memory disable/map-out for frb
文章浏览阅读1.2k次。最近和Infopath打了不少交道,Infopath真的不需要吗?呵呵,至少我需要,而且遇到了问题,遇到问题我们就要耐心的去解决问题,Isnt It? 呵呵。当在infopath表单模板库中出现不想要的表单模板后,我们需要将他删除,我是这样子做的,开始直接删除,此后表单一直处于正在删除状态,然后我又反复做了表单静止和表单删除操作,但是仍然无法删除。经过一翻努力我_怎样去掉infopath模板id
文章浏览阅读7.3k次,点赞16次,收藏53次。build_target函数是将box标签和anchor进行匹配,其中FPN特征图为三层,分别为降采样8,16,32,代码展示与解释如下:def build_targets(p, targets, model): # Build targets for compute_loss(), input targets(image,class,x,y,w,h) 获取yolov5网络输出 det = model.module.model[-1] if is_parallel(model)_yolov5 build_targets
文章浏览阅读1.2k次,点赞2次,收藏2次。一、springboot2代码:@PostMappingpublic ResponseEntity<MetaInfo> post(@RequestBody MetaInfo m) {...}flutter 代码:var response = await dio.post("http://localhost:1112/metaInfo", data: body);//或u..._flutter用dio如何与后端springboot交互