1.清空配置文件
reset saved-configuration
2.进入和退出接口视图
[AR1] interface Ethernet 0/0/0
[AR1-Ethernet0/0/0]
[AR1-Ethernet0/0/0]quit
[AR1]
3.为设备命名
[Huawei]sysname AR1
[AR1]
4.设置telnet密码
[AR1]user-interface vty 0 4
[AR1-ui-vty0-4]authentication-mode password
[AR1-ui-vty0-4]set authentication password cipher yeslab
[AR1-ui-vty0-4]user privilege level 3
5.显示系统运行配置信息
[AR1]displaycurrent-configuration
#
sysname R1
#
6.配置IP地址
[AR1] interface Ethernet0/0/0
[AR1-Ethernet0/0/0]ip address 12.1.1.1 255.255.255.0
[AR2] interface Ethernet0/0/0
[AR2-Ethernet0/0/0]ip address 12.1.1.2 255.255.255.0
7.显示接口状态
[AR1]display interface Ethernet 0/0/0
Ethernet0/0/0 current state : UP
Line protocol current state : UP
Last line protocol up time : 2013-05-14 11:47:52 UTC-08:00
Description:
Route Port,The Maximum Transmit Unit is 1500
Internet Address is 12.1.1.1/24
Broadcast: 1 packets
Output:
Unicast: 11 packets, Multicast: 0 packets
Broadcast: 0 packets
Input bandwidth utilization : 0%
Output bandwidth utilization : 0%
8.测试网络连通性
[AR1]ping 12.1.1.2
9.跟踪路径
[AR1]tracert 12.1.1.2
traceroute to 12.1.1.2(12.1.1.2), max hops: 30 ,packet length: 40,press CTRL_C to break
1 12.1.1.2 30 ms 50 ms 30 ms
10.查看路由表
[AR1]display ip routing
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
Destinations : 4 Routes : 4
11.设置空闲超时时间为20分钟,默认为10分钟。
[R1]user-interface console 0
[R1-ui-console0]authentication-mode password
[R1-ui-console0]set authentication password simple huawei
[R1-ui-console0]idle-timeout 20 0
12.使用display this命令检查配置结果.
[R1-ui-console0]display this
[V200R001C01SPC300]#
user-interface con 0
authentication-mode password
set authentication password simple huaweiidle-timeout 20 0
13.使用display interface命令查看接口详细信息。
[R1-Serial1/0/0]display interface Serial1/0/0
14.从R1使用Telnet方式登录到R2。
<R1>telnet 10.0.12.2
Press CTRL_]to quit telnet mode
Trying 10.0.12.2 ...
Connected to 10.0.12.2 ...
Login authentication
Username:huawei
Password:
15.R2配置为FTP服务器。在R2上启用FTP服务器功能。
[R2]ftp server enable
Info:Succeeded in starting the FTP server
[R2]set default ftp-directory sd1:/
[R2]aaa
[R2-aaa]local-user ftpuser password cipher huawei
[R2-aaa]local-user ftpuser service-type ftp
[R2-aaa]local-user ftpuser privilege level 15
尝试从R1用FTP工具登录到R2。
<R1>ftp 10.0.12.2
Trying 10.0.12.2 ...
Press CTRL+K to abort
Connected to 10.0.12.2.220
FTP service ready.
User(10.0.12.2:(none)):ftpuser
331 Password required for ftpuser.
Enter password:
230 User logged in.[R1-ftp]
15.将文件“file-from-r1.bak”从R2下载到R1,并更名为“file-from-r2.bak”。
[R1-ftp]get file-from-r1.bak file-from-r2.bak200 Port command okay.
16.删除R2上的文件“file-from-r1.bak”。
<R2>delete /unreserved file-from-r1.bak
17.保存当前的配置文件。
<R1>save
18.显示以保存的配置文件。
<R1>display saved-configuration
[V200R001C01SPC300]
19.显示当前生效的配置信息。
<R1>display current-configuration
[V200R001C01SPC300]
#sysname R1
#
board add 0/1 1SA
board add 0/2 1SA
board add 0/3 2FE
······output omit······
20.清除存储的配置文件。
<R1>reset saved-configuration
This will delete the configuration in the flash memory.The device configurations will be erased to reconfigure.Are you sure? (y/n)[n]:y
Clear the configuration in the device successfully.
<R1>
21.使用reboot命令重启路由器。
<R1>reboot
文章浏览阅读3.8k次,点赞9次,收藏28次。直接上一个工作中碰到的问题,另外一个系统开启多线程调用我这边的接口,然后我这边会开启多线程批量查询第三方接口并且返回给调用方。使用的是两三年前别人遗留下来的方法,放到线上后发现确实是可以正常取到结果,但是一旦调用,CPU占用就直接100%(部署环境是win server服务器)。因此查看了下相关的老代码并使用JProfiler查看发现是在某个while循环的时候有问题。具体项目代码就不贴了,类似于下面这段代码。while(flag) {//your code;}这里的flag._main函数使用while(1)循环cpu占用99
文章浏览阅读347次。idea shift f6 快捷键无效_idea shift +f6快捷键不生效
文章浏览阅读135次。Ecmacript 中没有DOM 和 BOM核心模块Node为JavaScript提供了很多服务器级别,这些API绝大多数都被包装到了一个具名和核心模块中了,例如文件操作的 fs 核心模块 ,http服务构建的http 模块 path 路径操作模块 os 操作系统信息模块// 用来获取机器信息的var os = require('os')// 用来操作路径的var path = require('path')// 获取当前机器的 CPU 信息console.log(os.cpus._node模块中有很多核心模块,以下不属于核心模块,使用时需下载的是
文章浏览阅读10w+次,点赞435次,收藏3.4k次。SPSS 22 下载安装过程7.6 方差分析与回归分析的SPSS实现7.6.1 SPSS软件概述1 SPSS版本与安装2 SPSS界面3 SPSS特点4 SPSS数据7.6.2 SPSS与方差分析1 单因素方差分析2 双因素方差分析7.6.3 SPSS与回归分析SPSS回归分析过程牙膏价格问题的回归分析_化工数学模型数据回归软件
文章浏览阅读7.5k次。如何利用hutool工具包实现邮件发送功能呢?1、首先引入hutool依赖<dependency> <groupId>cn.hutool</groupId> <artifactId>hutool-all</artifactId> <version>5.7.19</version></dependency>2、编写邮件发送工具类package com.pc.c..._hutool发送邮件
文章浏览阅读867次,点赞2次,收藏2次。docker安装elasticsearch,elasticsearch-head,kibana,ik分词器安装方式基本有两种,一种是pull的方式,一种是Dockerfile的方式,由于pull的方式pull下来后还需配置许多东西且不便于复用,个人比较喜欢使用Dockerfile的方式所有docker支持的镜像基本都在https://hub.docker.com/docker的官网上能找到合..._docker安装kibana连接elasticsearch并且elasticsearch有密码
文章浏览阅读1.3w次,点赞57次,收藏92次。整理 | 郑丽媛出品 | CSDN(ID:CSDNnews)近年来,随着机器学习的兴起,有一门编程语言逐渐变得火热——Python。得益于其针对机器学习提供了大量开源框架和第三方模块,内置..._beeware
文章浏览阅读7.9k次。//// ViewController.swift// Day_10_Timer//// Created by dongqiangfei on 2018/10/15.// Copyright 2018年 飞飞. All rights reserved.//import UIKitclass ViewController: UIViewController { ..._swift timer 暂停
文章浏览阅读986次,点赞2次,收藏2次。1.硬性等待让当前线程暂停执行,应用场景:代码执行速度太快了,但是UI元素没有立马加载出来,造成两者不同步,这时候就可以让代码等待一下,再去执行找元素的动作线程休眠,强制等待 Thread.sleep(long mills)package com.example.demo;import org.junit.jupiter.api.Test;import org.openqa.selenium.By;import org.openqa.selenium.firefox.Firefox.._元素三大等待
文章浏览阅读3k次,点赞4次,收藏14次。Java软件工程师职位分析_java岗位分析
文章浏览阅读2k次。Java:Unreachable code的解决方法_java unreachable code
文章浏览阅读1w次。1、html中设置标签data-*的值 标题 11111 222222、点击获取当前标签的data-url的值$('dd').on('click', function() { var urlVal = $(this).data('ur_如何根据data-*属性获取对应的标签对象